Matek HUBOSD8-SE (184A)
Matek HUBOSD8-SE (184A)

Matek HUBOSD8-SE (184A)

Regular price
Regular price
Sale price
Unit price
Sold out

HUBOSD8-SE has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/1.5A &10V/1.5A, Current sensor 184A, STOSD. It is specially made for the mini FPV Quad. Built-in STOSD8 can support Plug & Play, no complicated settings needed.


  • Input: 9~27V (3-6S LiPo)
  • Input TVS protection
  • Current Rating: 4X30A (Max.4x39A)
  • Current sensor 184A
  • Built-in STOSD8-SE
  • 46x36x4mm, 9g
  • Mounting holes 30.5mm Ø3mm

BEC 10V Outputs

  • Designed for Video TX or FPV camera.
  • Voltage: 10.0 +/- 0.2VDC
  • Continuous current: 1.5 Amps (Max.2A 10s/minute)
  • Output Ripple: 15mV (VIn=24V, VOut=10V@1.5A load)
  • Short-circuit tolerant (2 seconds/minute)
  • 10V can be used to power cameras labeled as 12V

BEC 5V Outputs

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 1.5 Amps (Max.2A 10s/minute)
  • Output Ripple: 23mV (VIn=24V, VOut=5V@1.5A load) Short-circuit tolerant (2 seconds/minute)


  • Autodetect PAL/NTSC
  • Dynamic on screen info
  • Automatic flight timer
  • Automatic cell detection
  • Low battery alarm
  • Exceeding mAh alarm
  • Min.voltage & Max.current recorder
  • Onscreen Pilot ID
  • Firmware upgradable
  • Simple GUI & setting
  • Plug & Play