RunCam Racer 2

Evolution For Racing Drone: 6MS Ultra Low Latency; Super-WDR; Micro Size; FOV 160 (1.8mm lens); FOV 145 (2.1mm lens)

AIO Switchable

4:3
Widescreen
NTSC
PAL
Joystick Control
UART Control

Joystick Control & UART Control Switchable: The top left corner of the screen will shortly display the current control mode.
The default is Joystick control mode.; Short the two camera control pins; Then power on, camera will auto switch between the two modes; The mode can be saved after power off. After switching to the desired mode, please unplug the short-circuit cable.

UART Control works with Flight Controllers:: BetaFlight 3.3 or above / ButterFlight 3.4 or above / CleanFlight 2.2 or above

Dimensions

Package

1x Camera
1x 1928 ABS bracket
1x 6pin FPV silicone cable
1x Set of screws
1x SELECTOR
1x Manual

Parameters

Model

RunCam Racer 2

Image Sensor

Super WDR CMOS Sensor

Horizontal Resolution

700TVL

Lens

2.1mm FOV 145°

Screen Format

4:3 / Widescreen Switchable

Signal System

NTSC / PAL Switchable

Mirror/Flip

Available

Integrated OSD

Yes

One Touch Scene Setting

Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight

S/N Ratio

>50dB

Electronic Shutter Speed

Auto

Min. Illumination

0.01Lux@1.2F

WDR

Super WDR

Day/Night

Auto

Menu Control

Joystick Control / UART Control Switchable

Power

DC 5-36V

Current

110mA@5V / 40mA@12V

Housing Material

ABS

Net Weight

5.5g

Dimensions

L19mm*W19mm*H18mm

Download

Manual

Price:

$54.90 $67.00

Brand: Runcam

Type: Cameras

Availability: 3 In Stock

Default Title

Quantity:

Evolution For Racing Drone: 6MS Ultra Low Latency; Super-WDR; Micro Size; FOV 160 (1.8mm lens); FOV 145 (2.1mm lens)

AIO Switchable

4:3
Widescreen
NTSC
PAL
Joystick Control
UART Control

Joystick Control & UART Control Switchable: The top left corner of the screen will shortly display the current control mode.
The default is Joystick control mode.; Short the two camera control pins; Then power on, camera will auto switch between the two modes; The mode can be saved after power off. After switching to the desired mode, please unplug the short-circuit cable.