KISS 32A 32bit ESC (2-6S)
The KISS ESC 32A powered by a M4 MCU is the new member in the KISS family, developed for race copters with power hungry motor/prop combinations. Actively limited to 45A for longevity it comes with all the features of its little brother, the ESC24A re. With a capacitor it can be driven by up to 6s lipos. This ESC is also compatible with Dshot2400 for an incredibly low response time.
Features
- 32-Bit-ARM Cortex M4 MCU @ 80 MHz
- Telemetry capability (voltage, current, temperature, rpm)
- Over current protection (measures the current and reduces it to max 45A)
- Over temperature protection (reduces the max power if hotter then 100°C)
- sinHybrid :: Sinwave/BackEMF Hybrid Commutation for smoother running.)
- Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).
- Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change.
- Expanded adaptive auto timing (3,25-30° advance on each commutation),
- For Race Multicopters (32A continuous also with weak cooling),High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor)
- Small size (19 x 27 mm)
- Accurate RPM control (2000 steps using Dshot)
- No additional capacitor needed for 3-5S. Add a min. 220μF min. 50V Cap for 6S usage!
- Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)
- Regenerative braking 3-6S LiPo Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto detected.
- Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL, S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus
- Operating voltage 9 - 30V (3-6s)
- Maximum continuous current 32A, instantaneous maximum current 45A, actively limited
- 600000 ERPM maximum rotation field speed (useage up to 500000 recommended)
Specifications
- Current Draw: 32A Continuous (45A Burst)
- Voltage Range: 2-6s Lipo
- Weight: 3.3g
- Size: 20mm x 26mm x 4.5mm
Download the KISS 32A User Manual.
Includes
- 1x KISS 32A ESC Race Edition Board
Flyduino
ESC's
4 In Stock
The KISS ESC 32A powered by a M4 MCU is the new member in the KISS family, developed for race copters with power hungry motor/prop combinations. Actively limited to 45A for longevity it comes with all the features of its little brother, the ESC24A re. With a capacitor it can be driven by up to 6s lipos. This ESC is also compatible with Dshot2400 for an incredibly low response time.
Features
- 32-Bit-ARM Cortex M4 MCU @ 80 MHz
- Telemetry capability (voltage, current, temperature, rpm)
- Over current protection (measures the current and reduces it to max 45A)
- Over temperature protection (reduces the max power if hotter then 100°C)
- sinHybrid :: Sinwave/BackEMF Hybrid Commutation for smoother running.)
- Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).
- Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change.
- Expanded adaptive auto timing (3,25-30° advance on each commutation),
- For Race Multicopters (32A continuous also with weak cooling),High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor)
- Small size (19 x 27 mm)
- Accurate RPM control (2000 steps using Dshot)
- No additional capacitor needed for 3-5S. Add a min. 220μF min. 50V Cap for 6S usage!
- Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)
- Regenerative braking 3-6S LiPo Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto detected.
- Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL, S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus
- Operating voltage 9 - 30V (3-6s)
- Maximum continuous current 32A, instantaneous maximum current 45A, actively limited
- 600000 ERPM maximum rotation field speed (useage up to 500000 recommended)
Specifications
- Current Draw: 32A Continuous (45A Burst)
- Voltage Range: 2-6s Lipo
- Weight: 3.3g
- Size: 20mm x 26mm x 4.5mm
Download the KISS 32A User Manual.
Includes
- 1x KISS 32A ESC Race Edition Board
Related Products
Lumenier LUX F7 Ultimate Flight Controller (Dual Gyros)
The Lumenier LUX F7 Ultimate Flight Controller is the next generation of the popular Lumenier LUX flight controller lineup. It uses a powerf...
Emax ECO Series 2306 - 2400Kv Motors
EMAX's ECO series focuses on quality, affordable motors that are lightweight but still remain durable. They are lightweight due to their new bell d...
RunCam Micro Eagle
123456 WDR level 1-6 available Mirror & Flip image available Dimension Package 1x Camera ...
ETHIX MR STEELE SILK MOTOR V3
Introducing the third iteration of the Mr. Steele motor line. This well-refined piece of kit is built upon the success of its predecessors and tune...
Holybro Kakute F7 V1.5 - Tekko32 BLHeli32 40A 4-in-1 ESC Stack
Holybro is saving you time and guesswork into making your perfect FPV stack. This combo comes with the Kakute F7 V1.5 FC and the Tekko32 40A 4-in-1...
Rush Tank 5.8GHz VTX w/ SmartAudio
The RUSH Tank is a high-quality 5.8GHz VTX with strong anti-interference ability and stable transmission. The TANK has four adjustable levels of tr...
Holybro Tekko32 F3 35A 3-6s BLHeli32 ESC (Set of 4)
This isn't a typo, these ESCs are equipped with an F3 processor. It is thought F3 will allow even faster ESC protocol readings than the current sta...
DAL 4045BN Bullnose
Product Details - Color: Black, Red, Green - Inner diameter: (Prop Mount) 5mm - Usage: 150+ Frame - DAL 4045 Bullnose, Pre-Balanced Props -...
RunCam Racer
RunCam Racer CMOS 700TVL Super WDR OSD4:3 Micro Racing Drone FPV camera Racing drone FPV camera High sharpness and 6...
TBS SMOKE STOPPER
Avoid imminent disaster with the TBS Smoke Stopper: A self-healing / resettable fuse in line of the power going to your quad. The first time yo...
EMAX Nano 5.8Ghz MMCX Straight Antenna - LHCP
Introducing the EMAX Nano FPV antenna. Engineered from the ground up for performance and size, the head of the Nano comes in at .85 grams of weight...
EMAX Nano 5.8Ghz SMA Antenna - LHCP
Introducing the EMAX Nano FPV antenna. Engineered from the ground up for performance and size, the head of the Nano comes in at .85 grams of weight...
EMAX Nano 5.8Ghz MMCX Straight Antenna - RHCP
Introducing the EMAX Nano FPV antenna. Engineered from the ground up for performance and size, the head of the Nano comes in at .85 grams of weight...
EMAX Nano 5.8Ghz SMA Antenna - RHCP
Introducing the EMAX Nano FPV antenna. Engineered from the ground up for performance and size, the head of the Nano comes in at .85 grams of weight...
Emax ECO Series 2207 - 2400KV Motors
EMAX's ECO series focuses on quality, affordable motors that are lightweight but still remain durable. They are lightweight due to their new bell d...
HGLRC Forward 5.8GHz 48CH 25/50/100/200/400mW VTX
Forward VTX is simulated 5.8GHz ISM band transmission with stable output power, long transmission distance, and strong power filter. Specification...
KISS FC V2 - 32bit Flight Controller
The Idea was to get the simple KISS FC to the next level and due to intensive long-term tests of some pretty good pilots, Flyduino optimized the co...
RunCam Micro Swift 3 V2
RunCamMicro Swift 3 V2 Classic CCD Camera, New appearance, new feature. Vivid Scene Se...
RunCam Racer 2
Evolution For Racing Drone 6MS Ultra Low Latency Super-WDR Micro Size FOV 160 (1.8mm lens) FOV 145 (2.1mm lens) AIO Switchab...
RunCam Racer Nano
The World's smallest and best WDR racing camera Dimensions Package Camera*1 1419 TPU bracket*1 ...
Lumenier BLHeli_32 32bit 50A 4-in-1 ESC 2-6s w/ BEC 2A/5v, DSHOT / Proshot
The Lumenier BLHeli_32 50A 4-in-1 ESC 2-6s w/ BEC 2A/5v, features the latest gen. BLHeli_32 firmware, and it is compatible with the newest DSHOT 12...
ImmersionRC Tramp HV 5.8GHz Video Tx - (US Version)
The ImmersionRC Tramp HV 5.8GHz Video Tx is one of the most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20m...
Bardwell F4 Flight Controller V2.15 AIO FC w/ OSD
The Bardwell F4 has been redesigned with V2 of the extremely popular Flight Controller. V2's 9v regulator and OSD circuit have been completely rede...
Betaflight F7 Flight Controller
This F7 Flight Controller is built for performance. The FC comes with an F745 MCU (better performance than F3 and F4 processors) and two gyros for ...
T-Motor F40 PRO II Replacement Bell - Gray
A replacement bell for the T-Motor F40 Pro II Motor. The bell says 2600KV but kv is determined by the windings, so this will work on any kv of the ...
XL5 V2 True X 5 inch FPV Freestyle Frame Kit 226mm
XL5 V2 True X 5 inch FPV Freestyle Frame Kit 226mm
EMAX Lightning S 35A ESC (BLHeli S)
Its time for an upgrade! BL Heli_S capable ESCs are here! These Emax Lightning 35A BL Heli_S ESCs have been fully tested and are compatible with ...
Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX)
The Lumenier TX5GS 25-200-500mW 5.8GHz FPV Video Transmitter w/ BFCMS Control is the perfect all around FPV VTX. This transmitter features the late...
HELI-NATION TALON F4
When it comes to the 20x20 board, most pilot's are going to use a 4 in 1 ESC. The problem with the 4 in 1 ESC is the connectors are not all the sam...
Team Black Sheep Oblivion Battery Strap
Hook & Loop strap with anti-slip coating. Secures the battery to your drone Dimensions: 15x250mm
TBS UNIFY PRO 5G8 LINEAR ANTENNA (U.FL)
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjunctio...
TBS UNIFY PRO 5G8 RP-SMA PIGTAIL (U.FL)
A spare RP-SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.
Goggles for Bugs 8 / Bugs 8 Pro (ALL 2.4gHz Drones)
The G3 is unlike any other conventional FPV headset around in the sense that it doesn’t have its own built-in monitor. This is because it wa...
MJX Bugs 3 Mini Brushless Drone
The Bugs 3 is designed for beginners. It is equipped with 1306 2750KV brushless motor to provide strong power. Built-in 7.4V 850mAh 45C LiPo batter...
MJX Bugs 8 Pro FPV Racing Drone Combo
The new Bugs 8 Pro is one of the cheapest all-in-one FPV packages you can find, And it will have 3S power! Not only that but it will also have both...
MJX Bugs 8 FPV Racing Drone with pre-installed Camera + 5.8G FPV Goggles
The Bugs 8 is a ready-to-fly (RTF) 250-size FPV racer that is aimed at the entry-level segment of the FPV racer market. Clearly, the Bugs 8 was des...
Aikon AK32 55A 3-6S BLHeli32 4-in-1 ESC
The Aikon AK32 4-in-1 55A 6S is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware. Features Ne...
Hubsan H122D X4 STORM Racing Drone with 2.4Ghz RC & Goggles
Features With a modular and customizable design, a carbon-fiber airframe, a 720p FPV camera module, and a flight time of over 6 minutes, thi...
JST Connectors, Pre-wired tails 1x pair M/F
Standard JST connector used on most LiPo batteries and packs. Why buy just the connectors and then have the hassle of soldering and assembly, t...
REVERB 3OZ COPPER PDB KIT - BLACK
PDB KIT 3oz Copper - 1.6mm PCB Genuine XT-60 with 14AWG Silicon wire 7 Pin JST-GH to solid core Silicon wire (For generic setup) 7 Pin JST-GH...
TBS UNIFY PRO 5G8 LINEAR ANTENNA (MMCX)
A linear antenna with MMCX connector. SPECS Weight: 1.8grams Length: approximately 102mm (include shrink tube) Width: 1.79mm
X-Racer F4 Flight Controller
AIO boards not your thing? X-racer is back and offers the same simplicity as before with a few minor changes. Betaflight OSD, power through vbat or...
Stick-On ND8 Filter for GoPro Session
ND filter specifically made for the GoPro Session. ND filters help avoid overexposed photos or videos. This filter simply sticks right on to the le...
Stick-On ND4 Filter for GoPro Session
ND filter specifically made for the GoPro Session. ND filters help avoid overexposed photos or videos. This filter simply sticks right on to the le...
Straight Pin Header 1 Row, 20 Pin, 2.54mm Pitch (2pcs)
These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). Th...
Lumenier AXII Patch Antenna 5.8GHz (RHCP)
The Lumenier AXII 5.8GHz Patch Antenna offers you the highest performance you can get from a mini patch antenna designed for FPV. The Lumenier AXII...