Power Distribution Board for Miniquad
This high quality Power distribution board is designed in house by the Abusemark, Japan
An essential component for miniquads and FPV racers
- High Quality PDB made in Japan
- Standard mounting holes for Naze32 size flight controllers
- High current capacity
- Stylish design
Unknown
Power Distribution Boards
Out of stock
This high quality Power distribution board is designed in house by the Abusemark, Japan
An essential component for miniquads and FPV racers
- High Quality PDB made in Japan
- Standard mounting holes for Naze32 size flight controllers
- High current capacity
- Stylish design
Related Products
Pololu 12V Step-Up/Step-Down Voltage Regulator S10V2F12
Ideal for using with PDB's that don't come with voltage regulators.Use with FPV setups that require clean 12v power supply The Pololu 12V Step-Up/S...
Pololu 5V, 500mA Step-Down Voltage Regulator D24V5F5
Ideal for powering Naze32 flight controllers when using OPTO ESC's or 5V FPV setups that require a clean power supply The compact (0.4″ × 0.5″) P...
Matek HUBOSD8-SE (184A)
HUBOSD8-SE has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional...
REVERB 3OZ COPPER PDB KIT - BLACK
PDB KIT 3oz Copper - 1.6mm PCB Genuine XT-60 with 14AWG Silicon wire 7 Pin JST-GH to solid core Silicon wire (For generic setup) 7 Pin JST-GH...
Matek FCHUB-A5 W/ CURRENT SENSOR 184A, BEC 5V 2A
This FCHUB was designed to be paired with the Matek F405 Mini. Together they work as a great combo for any build. Both the FCHUB and F405 Mini can...
Matek FCHUB-6S W/ CURRENT SENSOR 184A, BEC 5V & 10V
Description Direct connection to Matek F405-OSD Flight Controller Model: Matek FCHUB-6S Item Name: Power Distribution Board Built-...
Matek LED & POWER HUB 5IN1 V3
The 5 in 1 V3 system has been engineered to provide the highest possible performance and reliability in a 46 x 36mm sized PCB. The 5 in ...
Matek PDB-XPW PDB W/ Current Sensor 140A & Dual BEC
Features: Input voltage range (3S-5S LiPo operation): 9 - 21V DC PDB: 4 x 35A Regulated 5V and 12V outputs Current module 150A LED power indica...
Matek Systems PDB-XT60 with BEC 5V & 12V
The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power ...
Matek Mini PDB With BEC 5V And 12V
Details Mini POWER HUB has been designed to provide the best possible performance and reliability in a small 36*36mm PCB. The HUB distributes po...
Lumenier Mini 4Power + Plus PDB (20x20mm, 5v/8v Reg, 100A Curr.)
Details The Lumenier Mini 4Power + Plus PDB is a feature rich power distribution board designed for mini quadcopters. The board uses 20x20mm mou...
Lumenier 4Power + Plus PDB (5v/10v Reg, 184A Curr.)
Details The Lumenier 4Power + Plus PDB is a feature rich power distribution board designed for small quadcopters. The board uses the standard 30...
DIATONE V8.3 LC Filter Power HUB
Details: V8.3 Power HUB based on V7.3 changed the ESC solder tabs direction to make the ESC and battery solder pad be 90 degree, more suitable for...
Diatone Power HUB / PDB with 5V &12V Output
Details: This is a light weight and low cost Power Distribution Board (PDB) by Diatone. At 36mm x 36mm and 3.5g this PDB is great for high speed M...
100 Proof Simple PDB
A simple PDB designed in New Zealand for FPV sized multirotors. Designed for the 220-Proof FPV frame too allow maximum room for components while st...
Lumenier 4Power Mini PDB
The Lumenier 4Power Mini PDB is a 36mm simple power distribution board designed for small quadcopters. The board uses the standard 32mm mounting ho...
THuG PDB (Power Distribution Board) White
THuG PDB's mount to all THuG frames with 36x35mm mounting holes. Lipo in with 4x ESC out and two pololu bays underneath for the choice to run 5 o...